Oil Recovery Press

The Oil recovery system is designed to increase the swarf value, by minimizing the loss of cutting oil and there by reducing the adverse impact on environment. Typically the grinding waste contains 25-30% cutting oil. Our press extracts the maximum cutting oil that is being wasted and leaves behind oil free nature of pressed swarf. Pressed swarf/waste are suitable for efficient recycling and have higher value for product. Some of the common metals recovered are High Speed Steel (HSS), Tungsten and other precious metals.

Our Oil Recovery Press has a large capacity hopper (can hold approximately 970 Litres/256 US gallons). It has minimal running cost and short payback time which helps in saving remarkably on new oil costs.

Benefits of ORP
• Cost reduction through oil recovery
• Increased swarf value due to reduction in oil conten
• Minimize loss in cutting oil
• Environmental recycling credit
• Economical operation
• Short payback period

Applications

Machine Tool coolants (oil based)
• Grinding, Honing, Rolling,
• Electrical Discharge Machining (EDM)
• Electro-Chemical Machining (ECM) oil, etc

Miscellaneous oil application
• Lubricating oil, Hydraulic oil
• Transformer oil

Fact Sheet of ORP
(Actual data from manufacturing facility)

Details
Rate of processing 10 gal/hr 38 lit/hr
Swarf processed by ORP 2000 lbs 900 Kg
OIL RECOVERY (%) 4O gallons 150 litres

Utility Requirements

• Pneumatic : 80 T0 100 psi, 6 scfm (plant air)
• Electrical: 380 to 460 V, 50 or 60 Hz, 3 Ph, 25 amps
(we can match the site requirement)